scrap platinum buyers near me

admin1 Precious metals 2021-03-29 15:45 0


The concentration of waste platinum buyers near me is the molar ratio, the solid-to-liquid ratio is the reaction temperature, and the reaction time is hours; the concentration of the reduced platinum alloy is, the reaction temperature is, and the reaction time is. Recovery gold reached. The value of the platinum reduction solution obtained by the replacement method of the waste platinum recovery solution is adjusted to: the replacement metal is a mixed powder of zinc powder and iron powder, the mass ratio of zinc powder to iron powder is, the reaction temperature is, and the replacement metal is stopped in the liquid until reduction. Recovered platinum and palladium reach. Separate the silver in the solution with the waste platinum recycling slag, filter and obtain the branched silver plating solution and the branched silver slag. The silver separation solution is reduced to obtain thick silver powder. The strength solution concentration of platinum alloy is, the solid-liquid ratio is the reaction temperature, and the reaction time is. The waste platinum is adjusted to the value of the silver plating solution, the reducing agent is formaldehyde, and the mass ratio of platinum alloy to. The recovered silver content is reached. The silver slag is fractionated in the medium, the mixed solution is split when heated, and the lead splitting of the branched lead slag is filtered and obtained. The splitting liquid is cooled but separated and poured back together with the lead splitting. The separated plumbum liquid is regenerated and returned to the branch joint Foreword. The concentration of plumbum is, the concentration is the concentration, and the total ion concentration is. The solid-liquid ratio is the reaction temperature, where can I sell platinum near me. The reaction time is. Take the lead water back to the liquid recovery process, and add the concentration to. The recovery is achieved by separating the slag from tin and lead separation and roasting, filtering the shreds to obtain the branched tin solution and splitting, and obtaining the slag and the quality of the branched tin solution evaporating and crystallizing lead separation. For branched tin operation, the maturation temperature is and the roasting time is. The recovered waste platinum is reached.


Example Firstly, the waste circuit board was crushed by a roller crusher, and then concentrated and separated by wet method to obtain the component brass powder and non-metal powder, and then the component brass powder was smelted and cast to obtain a copper anode plate. Copper is electrolyzed and purified with the copper anode plate in the mixed solution to obtain copper cathode and copper anode slime. The concentration of copper electrolysis purification is, the concentration of platinum alloy is the concentration of gelatin, the concentration of thiourea is, the current density is, and the electrolysis temperature is. The purity of the obtained cathode copper reaches the level. The copper anode mud and the solution are mixed and added to branch the copper. The waste platinum is filtered and the copper leaching solution and branch copper leaching solution obtained are returned to the copper electrolysis purification, that is, the concentration of the branched copper is, and the concentration of platinum alloy recovery is the added amount For anode sludge, the solid-liquid ratio is the reaction temperature and the reaction time. The reduction rate of copper in copper anode slime is reached. In order to separate the copper ash from the mixed solution, filter and obtain the separated liquid and the separated slag, the separated liquid is reduced to obtain thick bronze and reduced back to the liquid. The concentration is the molar ratio, the solid-liquid ratio is the reaction temperature, and the reaction time is hours; the concentration of reduced gold is, the reaction temperature is, and the reaction time is. Recovered gold reached.


The waste platinum buyer near me uses the substitution method to obtain the value of the platinum reduction solution. The replacement metal is a mixed powder of zinc powder and iron powder, the mass ratio of zinc powder to iron powder is, the reaction temperature is, and the liquid stops Add replacement metal until reduction. Recovered platinum alloy reached. Separate the silver in the solution with the slag, filter and obtain the branched silver plating solution and the branched silver slag. The silver separation solution is reduced to obtain thick silver powder. Where can I sell platinum near me. The amount of the strength solution to separate waste platinum, gold and silver is, the solid-to-liquid ratio is the reaction temperature, and the reaction time is. The waste platinum recovery is divided by the value of the silver plating solution, the reducing agent is oxalic acid, and the platinum recovery near me. The mass ratio of oxalic acid is. Recovered platinum alloy reached. The silver slag is fractionated in the middle, the mixed solution is split when heated, and the lead separation of the branched lead slag is obtained by filtering and obtaining the lead separation of the branched lead slag. The platinum refinery near me. The split liquid is cooled but separated and poured back together with the lead split to regenerate the separated plumb liquid and return to the branch joint platinum alloy. Divide the concentration of plumb into, the concentration is the concentration, and the total ion concentration is. The solid-liquid ratio is the reaction temperature and the reaction time. Buyers of waste platinum adopt a lead-water back-to-liquid recycling process with a concentration of 5%.



发表评论

评论列表(条)